ADV Configuration
- Sequence 1 code title DUAL SERVO CONTROLLED VARIABLE DISPLACEMENT AXIALPISTON PUMP WITH SAE J744 FLANGE 101-2 (2 BOLT B) ADV 1
- Sequence 2 input shaft rotation LEFT HAND ROTATION (CCW) 2
- Sequence 3 input shaf t 15 TOOTH EXTERNAL SPLINE, 16/32 PITCH, 24.981 [.9835] MAJORDIAMETER; 46 [1.81] SHAFT EXTENSION 3
- Sequence 4 displacement & rotating kit- front 49.2 CM3/R [3.00 IN3/R]; ROTATING KIT- HIGH PRESSURE 4
- Sequence 5 valve plate- front TYPE 1 A 5
- Sequence 6 control assembly- front ELECTRONIC PROPORTIONAL CONTROL 12 VOLT DC WITHOUT ELECTRONIC DRIVER, WITH DEUTSCH CONNECTOR, WITHOUT HARNESS 6
- Sequence 7 relief setting for main port-a front 310.3 BAR [4500 LBF/IN2] 7
- Sequence 8 relief setting for main port-b front 310.3 BAR [4500 LBF/IN2] 8
- Sequence 9 drain port size and location- front 1.0625-12 UN-2B SAE O-RING PORT - LEFT (D1) & RIGHT (D2)HOUSING 9
- Sequence 10 main ports (a and b) No Preference 2 10
- Sequence 11 auxiliary port and bypass valve No Preference 11
- Sequence 12 charge pump 17.2 CM3/R [1.05 IN3/R] WITH 1.3125-12 UN-2B SAE O-RING PORTFOR SUCTION INLET (S); CHARGE PRESSURE DISCHARGE PORT (C3) - .750-16 UNF-2B SAE O-RING PORT 12
- Sequence 13 charge relief setting and routing 20.68-22.41 BAR [300-350 LBF/IN2]; RELIEVED TO CASE 13
- Sequence 14 displacement & rotating kit- rear 49.2 CM3/R [3.00 IN3/R]; ROTATING KIT- HIGH PRESSURE 14
- Sequence 15 valve plate- rear TYPE 1 A 15
- Sequence 16 control assembly- rear ELECTRONIC PROPORTIONAL CONTROL 12 VOLT DC WITHOUT ELECTRONIC DRIVER, WITH DEUTSCH CONNECTOR, WITHOUT HARNESS 16
- Sequence 17 relief setting for main port-a rear 310.3 BAR [4500 LBF/IN2] 17
- Sequence 18 relief setting for main port-b rear 310.3 BAR [4500 LBF/IN2] 18
- Sequence 19 drain port size and location- rear NONE 0 19
- Sequence 20 additional functions DIAMETER 0.91 [.036] ORIFICE (P), DIAMETER 1.85 [.073]ORIFICE (S1 & S2) 20
- Sequence 21 special features MOUNTING HOLES-2X M10 X 1.5-6H REAR HSG;MOUNTING 21
- Sequence 22 auxiliary mount features DUAL SAE J744 FLANGE 101-2 (2-BOLT B) WITH COVER PLATE 22
- Sequence 23 auxiliary pump number NO AUXILIARY PUMP 000 23
- Sequence 24 paint No Preference 0B 24
- Sequence 25 identification STANDARD 0 25
- Sequence 26 design code A A 26
- Blank Blank Blank