Sequence 5
input shaft
no preference
AA – 9 tooth 16/32 spline, min full spline 22.4 [.88], shaft ext 31.8 [1.25]
AB – 11 tooth 16/32 spline, min full spline 22.4 [.88], shaft ext 31.8 [1.25]
AC – straight shaft dia 19.05 [.750], keyway 4.8 x 25.4 [.19 x 1.00], shaft ext 31.8 [1.25] (key included)
AD – straight shaft dia 15.88 [.625], keyway 4.1 x 18.3 [.16 x .72], shaft ext 31.8 [1.25] (key included)
AE – 9 tooth 16/32 spline, min full spline 19 [.75], shaft ext 38.1 [1.50]
AF – straight shaft dia 17.45 [.687], keyway 4.8 x 25.4 [.19 x 1.00], shaft ext 42.9 [1.69] (key included)
AJ – straight shaft dia 17.45 [.687], keyway 4.8 x 25.4 [.19 x 1.00], shaft ext 63.5 [2.50] (key included)
AM – straight shaft dia 17.45 [.687] with set screw flat, keyway 4.8 x 25.4 [.19 x 1.00], shaft ext 63.5 [2.50] (key included)
AP – dia 17.45 [.687] taper .200,1, .375-16 unc-2a, keyway 4.1 x 18.8 [.16 x .74], shaft ext 44.8 [1.77] (key included)
AZ – straight shaft dia 19.05 [.750], keyway 4.8 x 25.4 [.19 x 1.00], shaft ext 50.8 [2.00] (key included)
BC – straight shaft dia 17.45 [.687], keyway 4.8 x 25.4 [.19 x 1.00], shaft ext 38.1 [1.50] (key included)
BD – straight shaft dia 19.05 [.750], tang width 6.4 [.25], shaft ext 12.7 [.50]
BE – dia 15.88 [.625] taper .125,1, .500-20 unf-2a with dia 3 [.12] thru hole, keyway 4.1 x 17.5 [.16 x .69], shaft ext 45.2 [1.78] (key included)
BF – dia 19.05 [.750] taper .125,1, .500-20 unf-2a, keyway 4.8 x 22.4 [.19 x .88], shaft ext 50 [1.97] (key included)
BG – dia 15.88 [.625] taper .125,1, .500-20 unf-2a, shaft ext 43.7 [1.72]
BH – dia 19.05 [.750] taper .200,1, .375-16 unc-2a, keyway 4.1 x 18.8 [.16 x .74], shaft ext 45 [1.77] (key included)
BK – straight shaft dia 15.88 [.625], .500-20 unf-2a, keyway 4.1 x 18.3 [.16 x .72], shaft ext 42.2 [1.66] (key included)
BP – straight shaft dia 17.45 [.687], with 2 rtng ring grooves, keyway 4.8 x 24.4 [.19 x .96], shaft ext 38.1 [1.50] (key included)
CE – straight shaft dia 15.86 [.624] with .500-20 unf-2a, keyway 4.1 x 19.1 [.16 x .545], shaft ext 50.8 [2.00] (key included)
CP – straight shaft dia 19.05 [.750], keyway 4.8 x 25.4 [.19 x 1.00], shaft ext 44.4 [1.75] (key included)
CV – dia 19.05 [.750] taper .200,1, .375-16 unc-2a, keyway 4.1 x 24.1 [.16 x .95], shaft ext 54.9 [2.16] (key included)
DP – 11 tooth 16/32 spline, min full spline 16.51 [.650], special extension integral mount
DV – straight shaft dia 19.05 [.750], keyway 4.8 x 42.2 [.19 x 1.66], shaft ext 67.6 [2.66] (key included)
DZ – 35 tooth 48/96 spline, min full spline 11.2 [.44], shaft ext 15.1 [.60]
ES – straight shaft dia 19.05 [.750], tang width 7.9 [.31], shaft ext 14 [.55]
FB – dia 19.05 [.750] taper .200 , .375-16 unc-2a, keyway 3.94 x dia 16.129 [.155 x .dia .635], shaft ext 45 [1.77] (woodruf key included)