160 Configuration
- Sequence 1 code title DANFOSS MEDIUM DUTY MANUALLY VARIABLE DISPLACEMENT AXIAL PISTON PUMP ADB 1
- Sequence 2 displacement 20.3 CM3/R [1.24 IN3/R] 2
- Sequence 3 input shaft rotation RIGHT HAND ROTATION (CW) 3
- Sequence 4 valve plate VALVE PLATE- TYPE 2 4
- Sequence 5 input shaft 13 TOOTH EXTERNAL SPLINE, 16/32 PITCH, 21.806 [.8585] MAJOR DIAMETER; 41.2 [1.62] SHAFT EXTENSION 5
- Sequence 6 control shaft location RIGHT SIDE 6
- Sequence 7 control shaft WITH THRU CROSS HOLE DIAMETER 6.35 [.250], ARM DIAMETER 17.32 [.682]; 113 [4.45] FROM UNIT CENTERLINE TO CONTROL SHAFT END 7
- Sequence 8 main port location (a and b) OPPOSITE SIDES 8
- Sequence 9 main port size (a and b) 1.0625-12 UN-2B SAE O-RING PORTS 1 9
- Sequence 10 relief valve setting for main port a 275.8 BAR [4000 LBF/IN2] 10
- Sequence 11 relief valve setting for main port b 275.8 BAR [4000 LBF/IN2] 11
- Sequence 12 charge disp. & suction port size (s) 6.9 CM3/R [.42 IN3/R]; (.750-16 UNF-2B SAE O-RING PORT FOR SUCTION INLET - RIGHT SIDE CCW, LEFT SIDE CW) 12
- Sequence 13 charge relief setting & routing 6.89-10.34 BAR [100-150 LBF/IN2] RELIEVED TO CASE 13
- Sequence 14 charge special feature NO SPECIAL CHARGE FEATURE 0 14
- Sequence 15 auxiliary rear mount and output shaft WITH INTEGRAL CHARGE - HORIZONTAL SAE J744 FLANGE 82-2 (2 BOLT A); 9 TOOTH INTERNAL 16/32 PITCH SPLINE WITH 31.7 [1.25] SHAFT EXTENSION 15
- Sequence 16 special features auxiliary mounting SUPPLY COVER PLATE FOR SAE J744 FLANGE 82-2 (2 BOLT A); BOTTOM MOUNTING BRACKET (709) 16
- Sequence 17 aux port top-front (c1) or bypass valve BYPASS VALVE INSTALLED 17
- Sequence 18 aux port top-rear (c2) .750-16 UNF-2B SAE O-RING PORT PLUGGED 18
- Sequence 19 aux port side (c4 or c5) (chg pump only) NO AUXILIARY PORT 0 19
- Sequence 20 case drain (d1 and d2) .750-16 UNF-2B SAE O-RING PORT D1-TOP (D2-BOTTOM PLUGGED) 20
- Sequence 21 thru drain front (d4) NO THRU DRAIN (D4)-FRONT 0 21
- Sequence 22 additional functions NO ADDITIONAL FUNCTIONS 0 22
- Sequence 23 special features NONE 23
- Sequence 24 paint BLACK PER SPEC 209-13B 24
- Sequence 25 identification DANFOSS IDENTIFICATION LABEL 0 25
- Sequence 26 design code C C 26
- Blank Blank Blank