MTB Configuration
- Sequence 1 product MOTOR M 1
- Sequence 2 series T SERIES MOTOR W/BRAKE TB 2
- Sequence 3 displacement 102 CM3/R [6.2 IN3/R] 3
- Sequence 4 mounting type 2 BOLT STD 82.50 (3.248) DIA. X 3.05 (.120) PILOT, 13.59 [.535] DIA. MOUNTING HOLES ON 106.35 [4.187] DIA. B.C. 4
- Sequence 5 output shaft 25.4 (1.00) DIA. STRAIGHT WITH WOODRUFF KEY, .250-20 UNC-2B HOLE IN SHAFT END 5
- Sequence 6 port type MANIFOLD PORTS (.3125-18 UNC-2B MOUNTING HOLES) 6
- Sequence 7 case flow options NONE SPECIFIED 7
- Sequence 8 geroler options STANDARD A 8
- Sequence 9 shaft options NONE 0 9
- Sequence 10 seal options STANDARD SEALS 10
- Sequence 11 speed sensor options NONE 11
- Sequence 12 valve options NONE 00 12
- Sequence 13 special features (hardware) NONE SPECIFIED 13
- Sequence 14 special assembly instructions BRAKE HOUSING ROTATED (360/7) X 2 DEGREES CLOCKWISE 14
- Sequence 15 paint/packaging options NO PAINT 15
- Sequence 16 customer id./nameplate options NONE SPECIFIED 00 16
- Sequence 17 design code TWO (2) B 17
- Blank Blank Blank