MCH Configuration
- Sequence 1 product XCEL Low Speed High Torque Motor M 1
- Sequence 2 product series XLH CH 2
- Sequence 3 displacement cc/r 315 CM3/R [19.2 IN3/R] 3
- Sequence 4 mounting flange 4 BOLT STANDARD, 44.40[1.748] DIA. X 3.05[.12] PILOT, 375-16 UNC-2B, MOUNTING HOLES ON 82.55[3.250] DIA. BOLT CIRCLE 4
- Sequence 5 output shaft 25.4 [1.00] DIA. STRAIGHT, PARALLEL KEY, .250-20 UNC-2B HOLE IN SHAFT END 5
- Sequence 6 main ports No Preference AE 6
- Sequence 7 case drain options NONE 0 7
- Sequence 8 gerotor options NONE 1 8
- Sequence 9 shaft options NONE 0 9
- Sequence 10 seal options STANDARD SEALS 00 10
- Sequence 11 speed sensor options NONE 0 11
- Sequence 12 manifold block options NONE A 12
- Sequence 13 special features (hardware) NONE 00 13
- Sequence 14 special assembly instructions NONE 0 14
- Sequence 15 paint No Preference C 15
- Sequence 16 assigned code when applicable NONE 00 16
- Sequence 17 design code SECOND (2) B 17
- Blank Blank Blank