Sequence 5
output shaft
no preference
01 – 38.10 [1.500] dia. straight with .375-16 unc-2b thread, and 9.52 [.375] sq x 38.10[1.500] straight key
02 – 31.75 [1.250] dia. .125;1 tapered shaft per sae j501 with 1.000-20 unef-2a threaded shaft end and slotted hex nut, 7.938[.3125] sq x 25.40 [1.000] straight key
04 – 31.75 [1.250] dia. flat root side fit, 14 tooth, 12/24 dp 30 deg. involute spline with .375-16 unc-2b thread in end, 33.0[1.30] minimum full spline length
06 – 38.10 [1.500] dia. tapered shaft per saej501 with 1.000-20 unef-2a threaded shaft end and slotted hex nut, 7.938 [.3125] sq x 31.75 [1.250] key
07 – 31.75 [1.250] dia. straight with .375-16 unc-2b thread, and 7.982[.3142]w x 6.954[.2738]h x 31.85[1.254]l key
08 – 32.00 [1.260] dia. straight shaft with m8 x 1.25-6h thread in end, and 9.982[.3930]w x 7.995[.3132]h x 45.00[1.772]l key
14 – 31.75 [1.250] dia. straight with .375-16 unc-2b thread, and 7.982[.3142] w x 6.954[.2738]h x 31.85[1.254]l key, hard chrome plated
16 – 25.40 [1.000] dia. sae 6b spline, .250-20 unc-2b hole in shaft end