10 Configuration
- Sequence 1 product MOTOR M 1
- Sequence 2 series 10,000 SERIES 10 2
- Sequence 3 displacement 665.3 CM3/R [40.60 IN3/R] 3
- Sequence 4 mounting type WHEEL, 4 BOLT; 16.76 [.660] DIA. HOLES ON 209.55 [8.250] DIA. BOLT CIRCLE 4
- Sequence 5 output shaft 57.15 [2.250] DIA. .125;1 TAPERED SHAFT PER SAE J501 WITH 1.500-18 UNEF-2A THREADED SHAFT END AND SLOTTED HEX NUT, 14.288 [.5625] SQUARE X 50.8 [2.00] STRAIGHT KEY 5
- Sequence 6 ports 31.75 [1.250] DIA. 4 BOLT SPLIT FLANGE, STAGGERED PORTS WITH .4375-14 UNC-2B TAPPED MOUNTING HOLES 6
- Sequence 7 case flow options No Preference 01 7
- Sequence 8 low pressure relief NONE 0 8
- Sequence 9 pressure / flow option NONE 00 9
- Sequence 10 geroler option STANDARD 0 10
- Sequence 11 seal option STANDARD 11
- Sequence 12 accessories NONE 12
- Sequence 13 special feature (hardware) NONE 00 13
- Sequence 14 special feature (assembly) NONE 14
- Sequence 15 paint / packaging NONE 15
- Sequence 16 customer identification NONE 00 16
- Sequence 17 design code THIRD C 17
- Blank Blank Blank