AEC 3D Model Configuration
This tool does not apply engineering rules to model code combinations. Engineering rules will be applied at time of order. Sequences that do not affect the external appearance of the model may not be displayed.
- Sequence 4 front mounting & input shaft 2 BOLT B (SAE J744-101-2) WITH 25.4[1.00] DIA STRAIGHT KEY SHAFT WITH .375-24 UNF-2B THREAD 4
- Sequence 5 main ports size & location REAR PORT; SUCTION 1.625-12 UN-2B SAE O-RING; PRESSURE 1.0625-12 UN-2B SAE O-RING 5
- Sequence 6 drain port size & location .875-14 UNF-2B O-RING PORT - TOP (28CC) 6
- Sequence 7 diagnostic pressure ports .4375-20 UNF-2B SAE O-RING PORTS - SUCTION AND PRESSURE - PLUGGED 1 7
- Sequence 8 controller type PRESSURE AND FLOW COMPENSATOR WITH .4375-20 SAE O-RING LOAD SENSE PORT LEFT SIDE 8
- Sequence 12 control special features NO CONTROL SPECIAL FEATURES 12
- Sequence 13 maximum displacement option EXTERNAL MANUAL STROKE ADJUSTMENT (SET AT MAXIMUM) 13
- Sequence 14 auxiliary (rear) mount & output shaft NO AUXILIARY MOUNT 00 14
- Sequence 16 pump special features NO PUMP SPECIAL FEATURES 16
- Blank Blank Blank
View and Download
Make sequence selections in order of most important to least to find a single 3D model. Only visually distinguishable features are available for configuration, features not relevant to 3D modeling have been omitted.
No models are available for your selections. Select the no preference option on sequences starting with least important until a model becomes available.