ABF 3D Model Configuration
This tool does not apply engineering rules to model code combinations. Engineering rules will be applied at time of order. Sequences that do not affect the external appearance of the model may not be displayed.
- Sequence 1 code title L2 GEAR PUMP (SINGLE UNIT) ABF 1
- Sequence 2 relief valve PLAIN A 2
- Sequence 3 input rotation RIGHT-HAND ROTATION (CW) 3
- Sequence 4 displacement 55.2 CM3/R [3.37 IN3/R] 4
- Sequence 5 input shaft 13 TOOTH 16/32 SPLINE, SHAFT EXT 41.1 [1.62] 5
- Sequence 6 port sizes & location - backplate PLAIN, SUCTION PORT 1.625-12 UN-2B SAE O-RING PORT; PRESSURE PORT 1.0625-12 UN-2B SAE O-RING PORT - REAR PORTS 6
- Sequence 7 priority flow divider setting NO FLOW SETTING 00 7
- Sequence 8 relief valve full flow setting NO RELIEF VALVE SETTING 00 8
- Sequence 9 auxiliary mounting feature (rear) NO AUXILIARY MOUNTING FEATURES 9
- Sequence 10 test data GENERIC 10
- Sequence 11 special features NO SPECIAL FEATURES 11
- Sequence 12 paint PRIMER PER SPEC 209-13A 12
- Sequence 13 identification STANDARD 0 13
- Sequence 14 design code A A 14
- Blank Blank Blank
View and Download
Make sequence selections in order of most important to least to find a single 3D model. Only visually distinguishable features are available for configuration, features not relevant to 3D modeling have been omitted.
No models are available for your selections. Select the no preference option on sequences starting with least important until a model becomes available.