04 3D Model Configuration
This tool does not apply engineering rules to model code combinations. Engineering rules will be applied at time of order. Sequences that do not affect the external appearance of the model may not be displayed.
- Sequence 1 product MOTOR M 1
- Sequence 2 series 4000 SERIES 04 2
- Sequence 3 displacement 130.3 CM3/R [7.95 IN3/R] 3
- Sequence 4 mounting type STANDARD, 4 BOLT; 127.00 [5.000] PILOT DIA.14.27 [.562] DIA. HOLES ON 161.92 [6.375] DIA. BOLT CIRCLE. (SAE C) 4
- Sequence 5 output shaft 31.75 [1.250] DIA. FLAT ROOT SIDE FIT, 14 TOOTH, 12/24 DP 30 DEG. INVOLUTE SPLINE, 38.1 [1.50] MINIMUM FULL SPLINE LENGTH WITH .375-16UNC-2B THREAD 5
- Sequence 6 ports 19.05 [.750] 4 BOLT SPLIT FLANGE STAGGERED PORTS STANDARD PRESSURE SERIES (CODE 61) 6
- Sequence 7 case flow options .4375-20 UNF-2B SAE O-RING PORT WITH CHECK VALVE 7
- Sequence 8 low pressure relief NONE 8
- Sequence 9 pressure/flow option NONE 00 9
- Sequence 10 geroler option INCREASED SIDE CLEARANCE, FREE RUNNING 10
- Sequence 11 seal option HIGH PRESSURE SHAFT SEAL 11
- Sequence 12 accessories NONE 12
- Sequence 13 special features (hardware) LOW NOISE VALVE PLATE 13
- Sequence 14 special features (assembly) NONE 00 14
- Sequence 15 paint/packaging PRIMER LOW GLOSS BLACK, INDIVIDUAL BOX 15
- Sequence 16 customer identification NONE 00 16
- Sequence 17 design code SIXTH 17
- Blank Blank Blank
View and Download
Make sequence selections in order of most important to least to find a single 3D model. Only visually distinguishable features are available for configuration, features not relevant to 3D modeling have been omitted.
No models are available for your selections. Select the no preference option on sequences starting with least important until a model becomes available.