PVE1 Configuration

Sequence 1

code title

PV – open circuit piston pump

Sequence 2

displacement

no preference

E19A – 41,0 cm3/r [2.50 in3/r]

E21A – 45,1 cm3/r [2.75 in3/r]

Sequence 3

input shaft rotation

no preference

L – left-hand rotation (ccw)

R – right-hand rotation (cw)

Sequence 4

front mounting & input shaft

no preference

01 – 2 bolt b (sae j744-101-2) with 22.2 [.88] dia straight key shaft (sae j744-22-1) (key included)

02 – 2 bolt b (sae j744-101-2) with 25.4 [1.00] dia straight key shaft (sae j744-25-1) (key included)

05 – 2 bolt b (sae j744-101-2) with 13t 16/32dp 41.1 [1.62] long splined shaft (ans b92.1-1970)

08 – 2 bolt b (sae j744-101-2) with 15t 16/32dp 46.0 [1.81] long splined shaft (ans b92.1-1970)

Sequence 5

main ports location & size

no preference

AA – side ports suction - 1.875-12 un-2b sae o-ring port pressure - 1.3125-12 un-2b sae o-ring port

AB – end ports suction - 1.875-12 un-2b sae o-ring port pressure - 1.3125-12 un-2b sae o-ring port

AC – side ports suction - 1.500 sae 4-bolt split flange port standard pressure series (code 61) pressure - 1.000 sae 4-bolt split flange port standard pressure series (code 61)

AD – end ports suction - 1.500 sae 4-bolt split flange port standard pressure series (code 61) pressure - 1.000 sae 4-bolt split flange port standard pressure series (code 61)

AT – end ports suction - short, 1.500 sae 4-bolt split flange port standard pressure series (code 61) pressure - 1.000 sae 4-bolt split flange port standard pressure series (code 61)

Sequence 6

drain port size & location

no preference

1 – .875-14 unf-2b sae o-ring port - top (d1); bottom plugged (d2)

2 – .875-14 unf-2b sae o-ring port - bottom (d2); top plugged (d1)

3 – .875-14 unf-2b sae o-ring port - top, front (vertical mount) top (d1) plugged & bottom (d2) plugged

A – .875-14 unf-2b sae o-ring port - top (d1) plugged & bottom (d2) plugged

M – .875-14 unf-2b sae o-ring port - top (d1) & bottom casting material removed (d2)

Sequence 7

diagnostic pressure port

no preference

0 – no diagnostic pressure port

1 – .4375-20 unf-2b sae o-ring port - plugged

Sequence 8

controller type

no preference

A – non-adjustable pressure compensator (19a & 21a only)

B – non-adjustable pressure and flow compensator (19a & 21a only)

D – non-adjustable hydraulic remote control pressure compensator (19a & 21a only)

E – unloading valve

Sequence 9

pressure comp.-unloading valve setting

no preference

01 – 20.68-27.58 bar [300-400 lbf/in2]

07 – 65.50-72.39 bar [950-1050 lbf/in2]

11 – 106.9-113.8 bar [1550-1650 lbf/in2]

12 – 117.2-124.1 bar [1700-1800 lbf/in2]

14 – 134.4-141.3 bar [1950-2050 lbf/in2]

16 – 151.7-158.6 bar [2200-2300 lbf/in2]

17 – 168.9-175.8 bar [2450-2550 lbf/in2]

18 – 182.7-189.6 bar [2650-2750 lbf/in2]

19 – 189.6-196.5 bar [2750-2850 lbf/in2]

21 – 203.4-210.3 bar [2950-3050 lbf/in2]

30 – 186.2-193.1 bar [2700-2800 lbf/in2]

33 – 206.8-213.7 bar [3000-3100 lbf/in2]

34 – 165.5-172.4 bar [2400-2500 lbf/in2]

38 – 179.3-193.1 bar [2600-2700 lbf/in2]

Sequence 10

flow comp. setting or unload vlv standby

no preference

00 – no flow compensator setting

11 – 9.65-12.41 bar [140-180 lbf/in2]

21 – 19.31-22.06 bar [280-320 lbf/in2]

24 – 22.75-25.51 bar [330-370 lbf/in2]

25 – 23.44-26.89 bar [340-390 lbf/in2]

28 – 26.20-28.96 bar [380-420 lbf/in2]

41 – 39.99-42.75 bar [580-620 lbf/in2]

Sequence 11

secondary compensator setting

00 – no secondary compensator setting

Sequence 12

control special features

no preference

0 – no special features

A – bleed down orifice

D – special adjustment plug

E – special adjustment plug & lockwashers under compensator bolts

G – high rate spring for low pressure setting

H – lockwashers under compensator bolts & not lockwired

Sequence 13

maximum displacement option

no preference

1 – standard displacement

2 – adjustable maximum displacement (set at maximum)

Sequence 14

auxiliary mounting & output shaft

no preference

00 – no auxiliary mounting or output shaft

AH – 2 bolt a (sae j744-82-2) w/ 9t 16/32dp internal splined coupling (asa b5.15-1960)

Sequence 15

shaft seals

no preference

0 – no shaft seal

1 – standard shaft seal (fluorocarbon)

Sequence 16

special features

no preference

00 – no special features

AF – cast iron housing

AG – q1830 valve plate

AH – uprated trunnion bearings

AP – q1830 valve plate & cast iron housing

BH – special end cover with tooling fixture finger next to suction port removed

Sequence 17

paint

no preference

00 – no paint

0B – black

CD – blue primer

Sequence 18

customer & unit identification

0 – none - mark assembly number, complete model code and build date code on plate

Sequence 19

design code

A – first design

Based on your browser settings, you are viewing this site in Americas.

Click here to see products offered in other regions.

Region

Global

AMER

APAC

EMEA

Language

English

Español

Français

Deutsch

Italiano

Português

日本語

简体中文

한국어

Based on your browser settings, you are viewing this site in Americas. Click here to see products offered in other regions.

Region

Global

AMER

APAC

EMEA

Language

English

Español

Français

Deutsch

Italiano

Português

日本語

简体中文

한국어

Sequence 1

Sequence 2

Sequence 3

Sequence 4

Sequence 5

Sequence 6

Sequence 7

Sequence 8

Sequence 9

Sequence 10

Sequence 11

Sequence 12

Sequence 13

Sequence 14

Sequence 15

Sequence 16

Sequence 17

Sequence 18

Sequence 19

Category Matches

Part Number & Model Code Matches

Sequence 1

Sequence 2

Sequence 3

Sequence 4

Sequence 5

Sequence 6

Sequence 7

Sequence 8

Sequence 9

Sequence 10

Sequence 11

Sequence 12

Sequence 13

Sequence 14

Sequence 15

Sequence 16

Sequence 17

Sequence 18

Sequence 19