V402 Configuration

Sequence 1

product

ADT – vis-40 2-speed motor

Sequence 2

displacement

no preference

20 – 324 cm3/r [19.8 in3/r]

24 – 400 cm3/r [24.4 in3/r]

31 – 503 cm3/r [30.7 in3/r]

35 – 572 cm3/r [34.9 in3/r]

38 – 631 cm3/r [38.5 in3/r]

42 – 683 cm3/r [41.7 in3/r]

48 – 787 cm3/r [48.0 in3/r]

57 – 941 cm3/r [57.4 in3/r]

Sequence 3

mounting type

no preference

A – bearingless, 4 bolt- 127.00 [5.000] pilot dia. with 12.19 [.480] pilot length and 14.35 [.565] dia. holes on 161.92 [6.375] bolt circle

C – oversized, 4 bolt- 184.4 [7.26] rear pilot dia. 169.90 [6.689], 139.93 [5.509], 127.0 [5.00] dia. (front pilots) and 18.0 [.709] dia. holes on 224.00 [8.819] dia. bolt circle

F – standard, (sae cc), 4 bolt- 127.00 [5.000] pilot dia. with 12.2 [.48] pilot length and 14.32 [.564] dia. holes on 161.92 [6.375] dia. bolt circle

G – wheel, 4 bolt- 139.7 [5.50] pilot dia. with 7.9 [.31] pilot length and 14.32 [.564] dia. holes on 184.15 [7.250] dia. bolt circle (sae compatible)

H – standard, 4 bolt- 125.0 [4.92] pilot dia. with 8.9 [.35] pilot length and 14.00 [.551] dia. holes on 160.00 [6.299] dia. bolt circle (iso compatible)

Sequence 4

output shaft

no preference

00 – none (bearingless)

02 – 44.45 [1.750] dia. .125-1 tapered shaft per sae j501 with 1.250-18 unef-2a threaded shaft end, 11.11 [.4375] sq. x 31.8 [1.25] straight key

07 – 40.00 [1.575] dia. straight shaft with m12 x 1.75-6h thread in end, 12w x 8h x 63l [.472w x .313h x 2.480l] key (sae compatible)

08 – 38.10 [1.500] dia. flat root side fit, 17 tooth, 12/24 dp 30 deg. involute spline, 39.1 [1.54] minimum full spline with .375-16 unc-2b thread in end (sae compatible)

23 – 38.10 [1.500] dia. straight shaft with .375-16 unc-2b thread in end, 9.52 [.375] sq x 41.28 [1.625] straight key

Sequence 5

ports

no preference

A – 1.0625-12 un-2b sae o-ring ports, side ported

C – 1.3125-12 un-2b sae o-ring ports, side ported

D – [.750] 4 bolt code 62 manifold ports per sae j518, side ported

E – g 1 bsp straight thread ports, side ported

Sequence 6

case flow option

no preference

A – shuttle valve with .5625-18 unf-2b, size 6 o-ring case drain port

B – shuttle valve with g 1/4 bsp straight thread case drain port

C – check valve with leakage orifice, no case drain

Sequence 7

low pressure relief

no preference

0 – none

1 – set at 4.5 bar [65 lbf/in2]

2 – set at 15.2 bar [220 lbf/in2]

4 – set at 20.7 bar [300 lbf/in2]

Sequence 8

special features

no preference

00 – none

06 – seal guard

22 – biased to high speed

Sequence 9

paint/packaging

no preference

0 – no paint, individual box

A – primer low gloss black, individual box

C – primer low gloss black, bulk box option

Sequence 10

customer identification

0 – none

Sequence 11

design code

D – four

Based on your browser settings, you are viewing this site in Americas.

Click here to see products offered in other regions.

Region

Global

AMER

APAC

EMEA

Language

English

Español

Français

Deutsch

Italiano

Português

日本語

简体中文

한국어

Based on your browser settings, you are viewing this site in Americas. Click here to see products offered in other regions.

Region

Global

AMER

APAC

EMEA

Language

English

Español

Français

Deutsch

Italiano

Português

日本語

简体中文

한국어

Sequence 1

Sequence 2

Sequence 3

Sequence 4

Sequence 5

Sequence 6

Sequence 7

Sequence 8

Sequence 9

Sequence 10

Sequence 11

Category Matches

Part Number & Model Code Matches

Sequence 1

Sequence 2

Sequence 3

Sequence 4

Sequence 5

Sequence 6

Sequence 7

Sequence 8

Sequence 9

Sequence 10

Sequence 11