Pumps - 72400-RUK-04 Pumps - 72400-RUK-04
Tools and Resources
Product Specifications
Feature Code Description
CODE TITLE ACG 49.2 cm3/r [3.00 in3/r] SERVO CONTROLLED VARIABLE DISPLACEMENT PUMP
INPUT SHAFT ROTATION R RIGHT HAND ROTATION (CW)
INPUT SHAFT A 15 TOOTH 16/32 EXTERNAL, DIAMETER 24.98 [.984], SHAFT EXTENSION 46 [1.81]
OUTPUT SHAFT F 11 TOOTH 16/32 INTERNAL, DIAMETER 19.33 [.761], ACCEPTS SHAFT EXTENSION 31.8 [1.25]
AUXILIARY MOUNTING FEATURES (REAR) A [2-BOLT A] SAE FLANGE SERIES 82-2
CHARGE PUMP 2 13.8 cm3/r [.84 in3/r] WITH 1.3125-12 UN-2B SAE O-RING PORT FOR SUCTION INLET (S)
CHARGE PUMP RELIEF SETTING AND ROUTING C 325 PSI RELIEVED TO CASE, REMOTE FILTER PORTS
AUXILIARY PORT SIZE AND LOCATION E .750-16 UNF-2B SAE O-RING PORT - LEFT (C1) & RIGHT (C2) SIDES (HOUSING), BOTH SIDES PLUGGED
DRAIN PORT SIZE AND LOCATION Z 1.0625-12 UN-2B SAE O-RING PORT - LEFT (D1) & RIGHT (D2) SIDES, LEFT AND RIGHT SIDE PLUGGED; THRU DRAIN INTO REAR AUXILIARY FLANGE (D3)
MAIN PORTS SIZE AND LOCATION 2 1.3125-12 UN-2B SAE O-RING PORT (A & B) - LEFT SIDE
RELIEF VALVE SETTING FOR MAIN PORT A M 258.6 bar [3750 lbf/in2]
RELIEF VALVE SETTING FOR MAIN PORT B M 258.6 bar [3750 lbf/in2]
ADDITIONAL FUNCTIONS 0 NO ADDITIONAL FUNCTIONS
CONTROL ASSEMBLY EP ELECTRONIC PROPORTIONAL CONTROL 12 VOLT DC WITHOUT ELECTRONIC DRIVER WITH DEUTSCH CONNECTOR, WITH FINE HI-GAIN CONTROL METERING
DESTROKE VALVE 0 NOT REQUIRED
CONTROL SUPPLY ORIFICE (p) A DIAMETER 0.71 [.028]
CONTROL SERVO ORIFICE (s1 AND s2) A DIAMETER 0.71 [.028]
SPECIAL CONTROL OPTIONS 0 NO SPECIAL CONTROL OPTIONS
PAINT 0B BLACK PER SPEC 209-13B
SPECIAL FEATURES CH 3.00 ROTATING GROUP WITH 2.48 TIMING WITH QUIET VALVE PLATE AND LEFT HAND NEUTRAL ADJUSTMENT
IDENTIFICATION 0 STANDARD
DESIGN CODE D D

Can’t find what you’re looking for? Submit a request