MC2 Configuration
- Sequence 1 product XCEL Low Speed High Torque Motor M 1
- Sequence 2 series XL2 C2 2
- Sequence 3 displacement 306.6 CM3/R [18.71 IN3/R] 3
- Sequence 4 mounting type STANDARD (MAGNETO), 4 BOLT; 82.6 [3.25] PILOT DIA. 13.59 [.535] DIA. HOLES ON 106.4 [4.19] DIA. BOLT CIRCLE. 2.79 [.110] PILOT LENGTH 4
- Sequence 5 output shaft 31.75 [1.250] DIA. STRAIGHT SHAFT WITH .375-16UNC-2B THREAD IN END, 7.938 [.3125] SQ X 31.75 [1.250] STRAIGHT KEY 5
- Sequence 6 ports .875-14 UNF-2B SAE O-RING PORTS - STAGGERED PORTS 6
- Sequence 7 case flow options No Preference 01 7
- Sequence 8 low pressure relief NONE 0 8
- Sequence 9 pressure/flow option NONE 00 9
- Sequence 10 geroler option STANDARD 1 10
- Sequence 11 seal option STANDARD 0 11
- Sequence 12 accessories NONE 00 12
- Sequence 13 special features (hardware) NONE 00 13
- Sequence 14 special features (assembly) NONE 00 14
- Sequence 15 paint/packaging No Preference AB 15
- Sequence 16 customer identification NONE AA 16
- Sequence 17 design code SECOND B 17
- Blank Blank Blank