Oil and Gas - EHP00148 Oil and Gas - EHP00148
Wish List
Industrial
EHP00148 EHP00148
Oil and Gas - Hose BlackCat Fracture 3 Inch | Braided| 50 Ft
Contact Me Where to Buy
Tools and Resources
Product Specifications
Burst Pressure (bar) 110
Burst Pressure (psi) 1600
Cover Material BRUISER?
Hose I.D. (in) 3
Hose I.D. (mm) 76.2
Hose O.D. (in) 3.69
Hose O.D. (mm) 93.7
Hose Type Frac and Well Service
Max Temperature (C) 93
Max Temperature (F) 200
Min Temperature (C) -40
Min Temperature (F) -40
Operating Pressure (PSI) 400
Operating Pressure (bar) 28
Product Line Industrial
Tube Material Nitrile blend
Available Length 50
Color Black
Cover Material BRUISER abrasion resistant cover
Description BLACKCAT FRAC
General Application Petroleum based fluids non-potable and salt water fracturing solutions and slurries
Hose Base Number EHP001
Hose Family Oil and Gas Exploration - Frac and Well Service
Hose I.D. (in) 3
Hose O.D. (in) 3.69
Markets 1) Oil and gas exploration 2) Well service 3) Fracking industry
Max Temperature (F) 200
Min Temperature (F) -40
Operating Pressure (PSI) 400
Quick Disconnect Coupling 1) Cam and Groove 2) Combination Nipple Contact coupling manufacturer for attachment procedure and other coupling recommendations
Reinforcement 4-ply polyester fabric
Tube Material Nitrile blend
Weight (lb/ft) 2.07
Overview & Features

Fracking hose capable of transferring fracking / slurry solutions, petroleum based fluids, non-potable and salt water

Features

  • 400 psi operating pressure
  • -40 F to 200 F
  • Bruiser Cover (700X greater wear capabilities than standard industry covers)
  • 4 Ply Textile reinforcement
  • Nitrile Blend Tube (RMA Class A)
  • 4:1 safety factor
  • 20% thicker inner tube than alternative market products
Where Used
Oil and gas
Platforms:
  • Upstream: Onshore Drilling Operations
Applications:
  • Frac Blender, missle, high pressure pumpers for transfer of fracing solutions
Value Propositions
  • OEM
  • Distributor
  • End User

Value Proposition Statement

Leverage increased service life and up-time on critical exploration job sites

  • OEM
  • Distributor
  • End User

Value Proposition Statement

The “Bruiser” cover provides up to 700X greater abrasion resistance than our standard rubber hose cover resulting in fewer external failures . External abrasion is the primary failure mode in this application

  • OEM
  • Distributor
  • End User

Value Proposition Statement

Assist to reduce replacement cost

  • OEM
  • Distributor
  • End User

Value Proposition Statement

Tube meets RMA Class A oil swell requirements (>25%) decreasing service failure in oil exposure applications as compared to a standard rubber tube material

= Denotes point of differentiation

Tools & Collateral