Tools and Resources
Product Specifications
Feature Code Description
CODE TITLE ACG 49.2 cm3/r [3.00 in3/r] SERVO CONTROLLED VARIABLE DISPLACEMENT PUMP
INPUT SHAFT ROTATION R RIGHT HAND ROTATION (CW)
INPUT SHAFT A 15 TOOTH 16/32 EXTERNAL, DIAMETER 24.98 [.984], SHAFT EXTENSION 46 [1.81]
OUTPUT SHAFT L 13 TOOTH 16/32 INTERNAL, DIAMETER 21.81 [.858], ACCEPTS SHAFT EXTENSION 41.1 [1.62]
AUXILIARY MOUNTING FEATURES (REAR) J [2-BOLT B] SAE FLANGE SERIES 101-2, WITH CHARGE ADAPTOR
CHARGE PUMP 2 13.8 cm3/r [.84 in3/r] WITH 1.3125-12 UN-2B SAE O-RING PORT FOR SUCTION INLET (S)
CHARGE PUMP RELIEF SETTING AND ROUTING C 325 PSI RELIEVED TO CASE, REMOTE FILTER PORTS
AUXILIARY PORT SIZE AND LOCATION E .750-16 UNF-2B SAE O-RING PORT - LEFT (C1) & RIGHT (C2) SIDES (HOUSING), BOTH SIDES PLUGGED
DRAIN PORT SIZE AND LOCATION E 1.0625-12 UN-2B SAE O-RING PORT - LEFT (D1) & RIGHT (D2) SIDES, LEFT SIDE PLUGGED; THRU DRAIN INTO REAR AUXILIARY FLANGE (D3)
MAIN PORTS SIZE AND LOCATION 1 1.3125-12 UN-2B SAE O-RING PORT (A & B) - RIGHT SIDE
RELIEF VALVE SETTING FOR MAIN PORT A N 275.8 bar [4000 lbf/in2]
RELIEF VALVE SETTING FOR MAIN PORT B N 275.8 bar [4000 lbf/in2]
ADDITIONAL FUNCTIONS 0 NO ADDITIONAL FUNCTIONS
CONTROL ASSEMBLY ER ELECTRONIC PROPORTIONAL CONTROL 12 VOLT DC W/O ELECTRONIC DRIVER WITH WHEATHER PACK 4 CONNECTOR, WITH FINE HI-GAIN CONTROL METERING
DESTROKE VALVE 0 NOT REQUIRED
CONTROL SUPPLY ORIFICE (p) C DIAMETER 0.91 [.036]
CONTROL SERVO ORIFICE (s1 AND s2) C DIAMETER 0.91 [.036]
SPECIAL CONTROL OPTIONS 0 NO SPECIAL CONTROL OPTIONS
PAINT 0B BLACK PER SPEC 209-13B
SPECIAL FEATURES AS DIAGNOSTIC PORTS 2X .5625-18 UNF-2B SAE O-RING PORTS, PLUGGED (BACKPLATE) 2X .4375-20 UNF-2B SAE O-RING PORTS, PLUGGED (s1 & s2) FOR SERVO PRESSURE CHECK
IDENTIFICATION 0 STANDARD
DESIGN CODE D D

Can’t find what you’re looking for? Submit a request