Tools and Resources
Product Specifications
Feature Code Description
CODE TITLE ACV EATON MEDIUM DUTY MANUALLY VARIABLE DISPLACEMENT AXIAL PISTON PUMP
DISPLACEMENT & VALVE PLATE 20 40.6 cm3/r [2.48 in3/r]; ROTATING KIT- STANDARD; VALVE PLATE- TYPE 1
INPUT SHAFT ROTATION L LEFT HAND ROTATION (CCW)
INPUT SHAFT E STRAIGHT; 22.212 [.8745] DIAMETER; 6.31 [.2485] W X 24.6 [.97] L KEY; 41.3 [1.62] SHAFT EXTENSION
CONTROL SHAFT K LEFT; 19.1 [.75] SQUARE SHAFT WITH BOLT GROOVE; 128 [5.04] FROM CENTERLINE TO CONTROL SHAFT END
MAIN PORTS (A AND B) 1 1.0625-12 UN-2B SAE O-RING PORTS; OPPOSITE SIDES
RELIEF VALVE SETTING FOR MAIN PORT A L 241.3 bar [3500 lbf/in2]
RELIEF VALVE SETTING FOR MAIN PORT B L 241.3 bar [3500 lbf/in2]
AUXILIARY MOUNT AND OUTPUT SHAFT (REAR) A1 HORIZONTAL SAE J744 FLANGE 82-2 (2 BOLT A); ACCEPTS 9 TOOTH 16/32 PITCH SPLINE WITH 31.7 [1.25] SHAFT EXTENSION (NO COUPLER REQUIRED)
AUXILIARY PORT AND DUMP VALVE Y .750-16 UNF-2B SAE O-RING PORT; TOP W\ HEX PLUG (C1); TOP-REARWARD W\ HEX PLUG (C2); NO DUMP VALVE
CHARGE PUMP 1 6.9 cm3/r [.42 in3/r]; .750-16 UNF-2B SAE O-RING PORT FOR SUCTION INLET (S)
CHARGE RELIEF SETTING AND ROUTING 11 6.89-10.34 bar [100-150 lbf/in2]; RECIRCULATED
DRAIN PORT SIZE AND LOCATION 1 .750-16 UNF-2B SAE O-RING PORT; TOP (D1); .750-16 UNF-2B SAE O-RING PORT; BOTTOM; PLUGGED (D2)
ADDITIONAL FUNCTIONS 0 NONE
SPECIAL FEATURES 0A FLUOROCARBON RUBBER DRIVE SHAFT SEAL AND CONTROL SHAFT SEAL
PAINT 0A RED OXIDE PRIMER PER SPEC 209-13A
IDENTIFICATION 0 STANDARD- NAMEPLATE
DESIGN CODE B B

Can’t find what you’re looking for? Submit a request