Pumps - 70160-RGH-03 Pumps - 70160-RGH-03
Wish List
Danfoss
70160-RGH-03 70160-RGH-03
Pumps - 1.24 MANUAL PUMP
Model Code: ADB12R1FRD11HH1A0A00010A00000A0C Modify Configuration Modify Configuration
Where to Buy
Product Specifications
Feature Code Description
CODE TITLE ADB DANFOSS MEDIUM DUTY MANUALLY VARIABLE DISPLACEMENT AXIAL PISTON PUMP
DISPLACEMENT 12 20.3 CM3/R [1.24 IN3/R]
INPUT SHAFT ROTATION R RIGHT HAND ROTATION (CW)
VALVE PLATE 1 VALVE PLATE- TYPE 1
INPUT SHAFT F STRAIGHT, 22.212 [.8745] DIAMETER, 6.35 [.250] W X 25.9 [1.02] L KEY(KEY INCLUDED); 41.3 [1.62] SHAFT EXTENSION
CONTROL SHAFT LOCATION R RIGHT SIDE
CONTROL SHAFT D WITH 15.7 [.62] SQUARE ARM, AND RADIUS 4.83 [.190] LOCKING BOLT GROOVE; 113 [4.45] FROM UNIT CENTERLINE TO CONTROL SHAFT END
MAIN PORT LOCATION (A AND B) 1 OPPOSITE SIDES
MAIN PORT SIZE (A AND B) 1 1.0625-12 UN-2B SAE O-RING PORTS
RELIEF VALVE SETTING FOR MAIN PORT A H 206.8 BAR [3000 LBF/IN2]
RELIEF VALVE SETTING FOR MAIN PORT B H 206.8 BAR [3000 LBF/IN2]
CHARGE DISP. & SUCTION PORT SIZE (S) 1 6.9 CM3/R [.42 IN3/R]; (.750-16 UNF-2B SAE O-RING PORT FOR SUCTION INLET - RIGHT SIDE CCW, LEFT SIDE CW)
CHARGE RELIEF SETTING & ROUTING A 6.89-10.34 BAR [100-150 LBF/IN2] RELIEVED TO CASE
CHARGE SPECIAL FEATURE 0 NO SPECIAL CHARGE FEATURE
AUXILIARY REAR MOUNT AND OUTPUT SHAFT A WITH INTEGRAL CHARGE - HORIZONTAL SAE J744 FLANGE 82-2 (2 BOLT A); 9 TOOTH INTERNAL 16/32 PITCH SPLINE WITH 31.7 [1.25] SHAFT EXTENSION
SPECIAL FEATURES AUXILIARY MOUNTING 00 NO SPECIAL FEATURES
AUX PORT TOP-FRONT (C1) OR BYPASS VALVE 0 NO AUXILIARY PORT OR BYPASS VALVE
AUX PORT TOP-REAR (C2) 1 .750-16 UNF-2B SAE O-RING PORT
AUX PORT SIDE (C4 OR C5) (CHG PUMP ONLY) 0 NO AUXILIARY PORT
CASE DRAIN (D1 AND D2) A .750-16 UNF-2B SAE O-RING PORT D1-TOP (D2-BOTTOM PLUGGED)
THRU DRAIN FRONT (D4) 0 NO THRU DRAIN (D4)-FRONT
ADDITIONAL FUNCTIONS 0 NO ADDITIONAL FUNCTIONS
SPECIAL FEATURES 00 NONE
PAINT 0A RED OXIDE PRIMER PER SPEC 209-13A
IDENTIFICATION 0 DANFOSS IDENTIFICATION LABEL
DESIGN CODE C C