ACK Configuration

Sequence 1 product COLUMN ACK 1
Sequence 2 jacket type TILT COLUMN WITH FLAT FLANGE, TILT LEVER ON LEFT SIDE OF PIVOT BRACKET EXTENDING TOWARD OPERATER 2
Sequence 3 lower shaft end SPLINED SHAFT 11.2 [.44] EXPOSED 3
Sequence 4 upper shaft end TAPERED 21.82 [.859] DIA, .052;1, AND SERRATED 21.79 [.858] DIA, 36 TOOTH, .8125-20 UNEF-2A THREAD, EXTENSION LENGTH 45.34 [1.785] 4
Sequence 5 jacket length description 228.6 [9.00] ABOVE PIVOT, 95.3 [3.75] BELOW PIVOT 5
Sequence 6 horn wire feature ONE HORN WIRE 6
Sequence 7 horn wire location AT 116.6 [4.59] ABOVE PIVOT ON BOTTOM OR NEAR SIDE TOWARD OPERATOR 7
Sequence 8 horn wire length 381 [15.00] BLACK WIRE FROM BOTTOM LEFT SIDE OF TILT COLUMN BOOT, RIGHT AND LEFT SIDE 2.5 [.10] X 53.3 [2.10] SLOTS FOR CUSTOMER USE 8
Sequence 9 horn wire terminal WEATHERPACK 1-PIN SHROUD 9
Sequence 10 shaft end wire TINNED BARE WIRE END 82.5 [3.25] 10
Sequence 11 special features COLLAR ON JACKET WITH 7.9 [.31] DIA HOLE ON LEFT SIDE AT 270 DEGREES AND 158 [6.22] ABOVE PIVOT, THREE HEAVY COUNTERBALANCE SPRINGS 11
Sequence 12 design code 001 12
Blank Blank Blank

Reset Reset Reset