ADY Configuration
- Sequence 1 code title PRESSURE COMPENSATED/PRESSURE FLOW COMPENSATED OPEN CIRCUIT PISTON PUMP ADY 1
- Sequence 2 displacement 74.0 CM3/R [4.51 IN3/R] 2
- Sequence 3 input shaft rotation RIGHT-HAND ROTATION (CW) RIGHT SIDE SUCTION PORT, LEFT SIDE PRESSURE PORT 3
- Sequence 4 front mounting & input shaft 4 BOLT C (SAE J744-127-4) WITH 14 TOOTH 12/24 PITCH SPLINE SHAFT (SAE J744-32-4) 4
- Sequence 5 main ports size & location 74 SIDE PORTS; SUCTION - 2.00 SAE J518 4-BOLT SPLIT FLANGE PORT STANDARD PRESSURE SERIES (CODE 61); PRESSURE - 1.00 SAE J518 4-BOLT SPLIT FLANGE PORT STANDARD PRESSURE SERIES (CODE 61) 5
- Sequence 6 drain port size & location 1.3125-12 UNF-2B O-RING PORT - TOP 6
- Sequence 7 diagnostic pressure ports NO DIAGNOSTIC PRESSURE PORTS 7
- Sequence 8 controller type No Preference 8
- Sequence 9 pressure compensator setting No Preference 9
- Sequence 10 flow compensator setting NO FLOW COMPENSATOR SETTING 10
- Sequence 11 torque control setting NO TORQUE CONTROL 11
- Sequence 12 control special features No Preference 12
- Sequence 13 maximum displacement option No Preference 13
- Sequence 14 auxiliary (rear) mount & output shaft No Preference 14
- Sequence 15 shaft seal NO SHAFT SEAL 15
- Sequence 16 pump special features No Preference 16
- Sequence 17 paint RED PRIMER 17
- Sequence 18 identification / packaging MARK DANFOSS PRODUCT NUMBER AND FULL MODEL CODE ON LABEL 00 18
- Sequence 19 design code SECOND DESIGN B 19
- Blank Blank Blank