ADV Configuration
- Sequence 1 code title DUAL SERVO CONTROLLED VARIABLE DISPLACEMENT AXIALPISTON PUMP WITH SAE J744 FLANGE 101-2 (2 BOLT B) ADV 1
- Sequence 2 input shaft rotation RIGHT HAND ROTATION (CW) 2
- Sequence 3 input shaf t 15 TOOTH EXTERNAL SPLINE, 16/32 PITCH, 24.981 [.9835] MAJORDIAMETER; 57.4 [2.26] SHAFT EXTENSION; MODIFIED 2 BOLT C MOUNT 3
- Sequence 4 displacement & rotating kit- front 40.6 CM3/R [2.48 IN3/R]; ROTATING KIT- STANDARD 4
- Sequence 5 valve plate- front TYPE 1 A 5
- Sequence 6 control assembly- front MANUAL CONTROL, HIGH GAIN, SHORTENED INPUT CONTROLSHAFT(+/- 17 DEGREE ACTIVE CONTROL SHAFT ROT) WITH CONTROL HANDLE AND KEY; .750-16 UNF-2B SAE O-RING PORT- PLUGGED; EXTERNAL SUPPLY PORT (P) - .4375-20 UNF-2B SAE O-RING PORT 6
- Sequence 7 relief setting for main port-a front 362.0 BAR [5250 LBF/IN2] 7
- Sequence 8 relief setting for main port-b front No Preference 8
- Sequence 9 drain port size and location- front 1.0625-12 UN-2B SAE O-RING PORT - RIGHT SIDE HOUSING (D2) 9
- Sequence 10 main ports (a and b) No Preference 2 10
- Sequence 11 auxiliary port and bypass valve .750-16 UNF-2B SAE O-RING PORTS - LEFT (C1) AND RIGHT (C2)SIDES, RIGHT SIDE PLUGGED; NO BYPASS VALVE 11
- Sequence 12 charge pump NO CHARGE PUMP 12
- Sequence 13 charge relief setting and routing 17.24-20.68 BAR [250-300 LBF/IN2]; RELIEVED TO CASE 13
- Sequence 14 displacement & rotating kit- rear 40.6 CM3/R [2.48 IN3/R]; ROTATING KIT- STANDARD 14
- Sequence 15 valve plate- rear TYPE 1 A 15
- Sequence 16 control assembly- rear MANUAL CONTROL, HIGH GAIN, SHORTENED INPUT CONTROLSHAFT(+/- 17 DEGREE ACTIVE CONTROL SHAFT ROT) WITH CONTROL HANDLE AND KEY; .750-16 UNF-2B SAE O-RING PORT- PLUGGED; EXTERNAL SUPPLY PORT (P) - .4375-20 UNF-2B SAE 16
- Sequence 17 relief setting for main port-a rear No Preference 17
- Sequence 18 relief setting for main port-b rear No Preference 18
- Sequence 19 drain port size and location- rear NONE 0 19
- Sequence 20 additional functions DIAMETER 1.60 [.063] ORIFICE (S1 & S2) 20
- Sequence 21 special features No Preference 21
- Sequence 22 auxiliary mount features DUAL SAE J744 FLANGE 101-2 (2-BOLT B) ACCEPTS 13 TOOTH16/32 PITCH SPLINE WITH 41.2 [1.62] SHAFT EXTENSION (NO COUPLER REQUIRED) 22
- Sequence 23 auxiliary pump number NO AUXILIARY PUMP 000 23
- Sequence 24 paint No Preference 0B 24
- Sequence 25 identification STANDARD 0 25
- Sequence 26 design code A A 26
- Blank Blank Blank