ACM Configuration

Sequence 1 code title SERIES 26 GEAR PUMP (MULTIPLE UNIT) ACM 1
Sequence 2 unit type FLOW DIVIDER W/ OR W/O RELIEF VALVE(SEE POSITIONS 20, 21) 2
Sequence 3 input rotation RIGHT-HAND ROTATION CW 3
Sequence 4 displacement (front) 16.7 CM3/R [1.02 IN3/R] 4
Sequence 5 displacement (center triple only) NO CENTER DISPLACEMENT 5
Sequence 6 displacement (rear) 16.7 CM3/R [1.02 IN3/R] 6
Sequence 7 input shaft 35 TOOTH 48/96 SPLINE, MIN FULL SPLINE 17.5 [.69], SHAFT EXT 32 [1.26] 7
Sequence 8 ports-front adapter SUCTION PORT 1.625-12 UN-2B SAE O-RING PORT; PRESSURE PORT .875-14 UNF-2B SAE O-RING PORT 8
Sequence 9 ports-rear adaptor (triple unit) NO REAR ADAPTOR 9
Sequence 10 ports sizes & locations-backplate FLOW DIVIDER, SUCTION PORT 1.3125-12 UN-2B SAE O-RING PORT (PLUGGED); PRIORITY PRESSURE PORT .750-16 UNF-2B SAE O-RING PORT; SECONDARY PRESSURE PORT .875-14 UNF-2B SAE O-RING PORT - SIDE PORTS 10
Sequence 11 priority flow divider setting 5.7 L/MIN [1.50 GAL/MIN] 11
Sequence 12 relief valve full flow setting NO RELIEF VALVE SETTING 12
Sequence 13 mounting features (front) (2-BOLT A) SAE FLANGE SERIES 82-2 13
Sequence 14 auxiliary mounting features (rear) NO REAR MOUNTING 14
Sequence 15 test data UNIT SPECIFIC 15
Sequence 16 special features NO SPECIAL FEATURES 16
Sequence 17 paint PRIMER PER SPEC 209-13A 17
Sequence 18 identification STANDARD 0 18
Sequence 19 design code B LONGER SLIP FIT KEY 19
Blank Blank Blank

Reset Reset Reset

View 56 Results Find 3D Model