360 Configuration
- Sequence 1 code title DANFOSS MEDIUM DUTY MANUALLY VARIABLE DISPLACEMENT AXIAL PISTON PUMP ACV 1
- Sequence 2 displacement & valve plate 40.6 CM3/R [2.48 IN3/R]; ROTATING KIT- STANDARD; VALVE PLATE- TYPE 1 2
- Sequence 3 input shaft rotation No Preference R 3
- Sequence 4 input shaft 15 TOOTH EXTERNAL SPLINE; 16/32 PITCH; 24.981 [.9835] MAJOR DIA; 46 [1.81] SHAFT EXT 4
- Sequence 5 control shaft RIGHT; 19.1 [.75] SQUARE SHAFT WITH BOLT GROOVE; 128 [5.04] FROM CENTERLINE TO CONTROL SHAFT END 5
- Sequence 6 main ports (a and b) 1.0625-12 UN-2B SAE O-RING PORTS; OPPOSITE SIDES 1 6
- Sequence 7 relief valve setting for main port a 241.3 BAR [3500 LBF/IN2] 7
- Sequence 8 relief valve setting for main port b 241.3 BAR [3500 LBF/IN2] 8
- Sequence 9 auxiliary mount and output shaft (rear) HORIZONTAL SAE J744 FLANGE 82-2 (2 BOLT A); ACCEPTS 9 TOOTH 16/32 PITCH SPLINE WITH 31.7 [1.25] SHAFT EXT (NO COUPLER REQUIRED) 9
- Sequence 10 auxiliary port and dump valve .750-16 UNF-2B SAE O-RING PORT-TOP (C1); NO DUMP VALVE 10
- Sequence 11 charge pump 6.9 CM3/R [.42 IN3/R]; .750-16 UNF-2B SAE O-RING PORT FOR SUCTION INLET (S) 11
- Sequence 12 charge relief setting and routing 17.24-20.68 BAR [250-300 LBF/IN2]; RELIEVED TO CASE 12
- Sequence 13 drain port size and location .750-16 UNF-2B SAE O-RING PORT-TOP (D1); .750-16 UNF-2B SAE O-RING PORT-BOTTOM (D2); PLUGGED 13
- Sequence 14 additional functions NONE 14
- Sequence 15 special features NONE 15
- Sequence 16 paint RED OXIDE PRIMER PER SPEC 209-13A 16
- Sequence 17 identification STANDARD- NAMEPLATE 17
- Sequence 18 design code B B 18
- Blank Blank Blank