360 Configuration
- Sequence 1 code title DANFOSS MEDIUM DUTY MANUALLY VARIABLE DISPLACEMENT AXIAL PISTON PUMP ACV 1
- Sequence 2 displacement & valve plate 40.6 CM3/R [2.48 IN3/R]; ROTATING KIT- STANDARD; VALVE PLATE- TYPE 1 2
- Sequence 3 input shaft rotation No Preference R 3
- Sequence 4 input shaft 41 TOOTH EXTERNAL SPLINE; 48/96 PITCH; 22.225 [.8750] MAJOR DIA; 24.4 [.96] SHAFT EXT 4
- Sequence 5 control shaft LEFT; 19.1 [.75] SQUARE SHAFT WITH BOLT GROOVE; 134.1 [5.28] FROM CENTERLINE TO CONTROL SHAFT END 5
- Sequence 6 main ports (a and b) 1.0625-12 UN-2B SAE O-RING PORTS; OPPOSITE SIDES 1 6
- Sequence 7 relief valve setting for main port a No Preference 7
- Sequence 8 relief valve setting for main port b 241.3 BAR [3500 LBF/IN2] 8
- Sequence 9 auxiliary mount and output shaft (rear) HORIZONTAL SAE J744 FLANGE 82-2 (2 BOLT A); ACCEPTS 9 TOOTH 16/32 PITCH SPLINE WITH 31.7 [1.25] SHAFT EXT (NO COUPLER REQUIRED) 9
- Sequence 10 auxiliary port and dump valve .750-16 UNF-2B SAE O-RING PORT; TOP W/ HEX PLUG (C1); NO DUMP VALVE 10
- Sequence 11 charge pump NO CHARGE PUMP 11
- Sequence 12 charge relief setting and routing NONE 12
- Sequence 13 drain port size and location .750-16 UNF-2B SAE O-RING PORT-TOP (D1); .750-16 UNF-2B SAE O-RING PORT-BOTTOM (D2); PLUGGED; THRU DRAIN INTO FRONT MOUNTING FLANGE (D4) 13
- Sequence 14 additional functions BLEED-OFF IN CONTROL SHAFT POS B, 6.9-10.3 BAR [100-150 LBF/IN2] 14
- Sequence 15 special features NONE 15
- Sequence 16 paint BLACK PER SPEC 209-13B 16
- Sequence 17 identification STANDARD- NAMEPLATE 17
- Sequence 18 design code B B 18
- Blank Blank Blank