160 Configuration
- Sequence 1 code title DANFOSS MEDIUM DUTY MANUALLY VARIABLE DISPLACEMENT AXIAL PISTON PUMP ADB 1
- Sequence 2 displacement 23.6 CM3/R [1.44 IN3/R] 2
- Sequence 3 input shaft rotation RIGHT HAND ROTATION (CW) 3
- Sequence 4 valve plate VALVE PLATE- TYPE 1 4
- Sequence 5 input shaft 13 TOOTH EXTERNAL SPLINE, 16/32 PITCH, 21.806 [.8585] MAJOR DIAMETER; 41.2 [1.62] SHAFT EXTENSION 5
- Sequence 6 control shaft location LEFT SIDE 6
- Sequence 7 control shaft WITH 15.7 [.62] SQUARE ARM, AND RADIUS 4.83 [.190] LOCKING BOLT GROOVE; 113 [4.45] FROM UNIT CENTERLINE TO CONTROL SHAFT END 7
- Sequence 8 main port location (a and b) SAME SIDE (BOTTOM) NOT AVAILABLE WITH INTERNAL CHARGE PUMP 8
- Sequence 9 main port size (a and b) 1.0625-12 UN-2B SAE O-RING PORTS 1 9
- Sequence 10 relief valve setting for main port a 241.3 BAR [3500 LBF/IN2] 10
- Sequence 11 relief valve setting for main port b 241.3 BAR [3500 LBF/IN2] 11
- Sequence 12 charge disp. & suction port size (s) NO CHARGE PUMP 12
- Sequence 13 charge relief setting & routing 10.34-13.79 BAR [150-200 LBF/IN2] RELIEVED TO CASE 13
- Sequence 14 charge special feature NO SPECIAL CHARGE FEATURE 0 14
- Sequence 15 auxiliary rear mount and output shaft NO INTEGRAL CHARGE- HORIZONTAL / VERTICAL SAE J744 FLANGE 82-2 (2 BOLT A) 11 TOOTH EXTERNAL 16/32 PITCH SPLINE WITH 31.7 [1.25] SHAFT EXTENSION (COUPLER REQUIRED) 15
- Sequence 16 special features auxiliary mounting SUPPLY SHAFT COUPLER 11 TOOTH 16/32 PITCH AND AUXILIARY MOUNTING HOLES, 2X .375-16 UNC-2B THREAD, 15 [.59] MIN FULL THREAD, BOTH SIDES 16
- Sequence 17 aux port top-front (c1) or bypass valve BYPASS VALVE INSTALLED 17
- Sequence 18 aux port top-rear (c2) .750-16 UNF-2B SAE O-RING PORT 18
- Sequence 19 aux port side (c4 or c5) (chg pump only) NO AUXILIARY PORT 0 19
- Sequence 20 case drain (d1 and d2) .750-16 UNF-2B SAE O-RING PORT D1-TOP (D2-BOTTOM PLUGGED) 20
- Sequence 21 thru drain front (d4) NO THRU DRAIN (D4)-FRONT 0 21
- Sequence 22 additional functions NO ADDITIONAL FUNCTIONS 0 22
- Sequence 23 special features NONE 23
- Sequence 24 paint BLACK PER SPEC 209-13B 24
- Sequence 25 identification DANFOSS IDENTIFICATION LABEL 0 25
- Sequence 26 design code C C 26
- Blank Blank Blank