MT0 Configuration

Sequence 1

product

M – motor

Sequence 2

series

T0 – t series motor

Sequence 3

displacement

no preference

018 – 29 cm3/r [1.8 in3/r]

022 – 35 cm3/r [2.2 in3/r]

030 – 49 cm3/r [3.0 in3/r]

036 – 59 cm3/r [3.6 in3/r]

040 – 65 cm3/r [4.0 in3/r]

049 – 80 cm3/r [4.9 in3/r]

062 – 102 cm3/r [6.2 in3/r]

080 – 131 cm3/r [8.0 in3/r]

096 – 158 cm3/r [9.6 in3/r]

119 – 195 cm3/r [11.9 in3/r]

149 – 244 cm3/r [14.9 in3/r]

187 – 306 cm3/r [18.7 in3/r]

226 – 370 cm3/r [22.6 in3/r]

298 – 488 cm3/r [29.8 in3/r]

Sequence 4

mounting type

no preference

AA – 2 bolt std - 82.50 [3.248] dia. x 3.05 [.120] pilot, 13.59 [.535] dia. mounting holes on 106.35 [4.187] dia. b.c.

BA – 4 bolt std - 44.40 [1.748] dia. x 3.05 [.120] pilot, .375-16 unc-2b mounting holes on 82.55 [3.250] dia. b.c. (no pilot for extreme duty seal)

BD – 4 bolt std - 44.40 [1.748] dia. x 3.05 [.120] pilot, .375-16 unc-2b mounting holes on 82.55 [3.250] dia. b.c. (ductile)

CA – 2 bolt std - 82.50 [3.248] dia. x 6.10 [.240] pilot, 10.41 [.410] dia. mounting holes on 106.35 [4.187] dia. b.c. (sae a)

DD – 2 bolt std - 101.60 [4.000] dia. x 6.10 [.240] pilot, 14.35 [.565] dia. mounting holes on 146.05 [5.750] dia. b.c. (sae b) (ductile)

EA – 4 bolt magneto - 82.50 [3.248] dia. x 3.05 [.120] pilot, 13.59 [.535] dia. mounting holes on 106.35 [4.187] dia. b.c.

FA – 4 bolt std - 44.40 [1.748] dia. x 3.05 [.120] pilot, m10 x 1.5-6h mounting holes on 82.55 [3.250] dia. b.c.

MA – 2 bolt std - 82.50 [3.248] dia. x 8.13 [.320] pilot, 13.59 [.535] dia. mounting holes on 106.35 [4.187] dia. b.c., w/o o-ring groove

Sequence 5

output shaft

no preference

01 – 25.4 [1.00] dia. straight, woodruff key, .250-20 unc-2b hole in shaft end

02 – 25.4 [1.00] dia. sae 6b spline, .250-20 unc-2b hole in shaft end

07 – 25.4 [1.00] dia. straight, 8.03 [.316] dia. crosshole 11.2 [.44] from end, 5.6 [.22] extra length

08 – 25.4 [1.00] dia. straight, 10.31 [.406] dia. crosshole 15.7 [.62] from end, .250-20 unc-2b hole in shaft end

11 – 25.4 [1.00] dia. straight, woodruff key, 15.7 [.62] extra length

16 – 22.22 [.875] dia. sae 13 tooth spline (sae b)

18 – 25.4 [1.00] dia. tapered, woodruff key and nut, 34.92 [1.375] taper length

24 – 25.00 [.984] dia. straight, 8.00 [.315] key, m8 x 1.25-6h hole in shaft end

39 – 25.00 [.984] dia. straight (k6), 8.00 [.315] key, m8 x 1.25-6h hole in shaft end

49 – 25.4 [1.00] dia. sae 6b spline (k6), m8 x 1.25-6h hole in shaft end

Sequence 6

port type

no preference

AA – .875-14 unf-2b sae o-ring ports

AB – .500-14 nptf dryseal pipe thread ports

AC – manifold ports (.3125-18 unc-2b mounting holes)

AD – manifold ports (m8 x 1.25-6h mounting holes)

AF – g 1/2 bsp straight thread ports

AK – .5625-18 unf-2b sae o-ring ports

Sequence 7

case flow options

no preference

00 – none specified

01 – .4375-20 unf-2b sae o-ring port (end cap)

02 – g 1/4 bsp straight thd port (end cap)

03 – manifold case drain

04 – .4375-20 unf-2b sae o-ring port (side of housing)

10 – internal check valves

13 – internal check valves, .4375-20 unf-2b sae o-ring port (end cap)

14 – internal check valves, g 1/4 bsp straight thd port (end cap)

Sequence 8

geroler options

no preference

0 – none

A – free running

Sequence 9

shaft options

no preference

0 – none

N – electroless nickel plated

Sequence 10

seal options

no preference

00 – standard seals

03 – viton seals

04 – viton shaft seal

06 – double shaft seals

07 – high pressure shaft seal

10 – teflon shaft seal

11 – high pressure shaft seal, slinger seal (seal protector)

Sequence 11

speed sensor options

no preference

00 – none

AA – digital speed pickup (15 pulse), m12 connector (a=power, b=common, c=signal)

AB – dual pulse version 2, (60 pulse by quadrature), m12 connector (a=power, b=common, c=signal)

AE – digital speed pickup (15 pulse), 127 [5.0] lead wire with packard weather pac shroud connector (a=power, b=signal, c=common)

AP – digital speed pickup (15 pulse), 127 [5.0] lead wire with packard weather pac shroud connector (a=power, b=signal, c=common),rotated 90 degrees

AT – digital speed pickup (30 pulse), m12 connector (a=power, b=common, c=signal)

Sequence 12

valve options

00 – none

Sequence 13

special features (hardware)

no preference

00 – none specified

AB – low speed valving

JM – low speed valving, low flow option

Sequence 14

special assembly instructions

no preference

0 – none

1 – reverse rotation

2 – flange rotated 90 degrees

Sequence 15

paint/packaging options

no preference

00 – no paint

AA – primer low gloss black

AF – environmental coated black

AJ – painted low gloss black, 2 mils min thick

AL – primer yellow

AN – primer blue

AR – painted charcoal gray

AY – nickel plated motor (excluding shaft)

Sequence 16

customer id./nameplate options

00 – none specified

Sequence 17

design code

A – one

Based on your browser settings, you are viewing this site in Americas.

Click here to see products offered in other regions.

Region

Global

AMER

APAC

EMEA

Language

English

Español

Français

Deutsch

Italiano

Português

日本語

简体中文

한국어

Based on your browser settings, you are viewing this site in Americas. Click here to see products offered in other regions.

Region

Global

AMER

APAC

EMEA

Language

English

Español

Français

Deutsch

Italiano

Português

日本語

简体中文

한국어

Sequence 1

Sequence 2

Sequence 3

Sequence 4

Sequence 5

Sequence 6

Sequence 7

Sequence 8

Sequence 9

Sequence 10

Sequence 11

Sequence 12

Sequence 13

Sequence 14

Sequence 15

Sequence 16

Sequence 17

Category Matches

Part Number & Model Code Matches

Sequence 1

Sequence 2

Sequence 3

Sequence 4

Sequence 5

Sequence 6

Sequence 7

Sequence 8

Sequence 9

Sequence 10

Sequence 11

Sequence 12

Sequence 13

Sequence 14

Sequence 15

Sequence 16

Sequence 17