Sequence 5
output shaft
no preference
02 – 31.75 [1.250] dia. straight shaft with .375-16 unc-2b thread in end, 7.938 [.3125] sq x 31.75 [1.250] straight key
03 – 31.75 [1.250] dia. .125;1 tapered shaft per sae j501 with 1.000-20 unef-2a threaded shaft end and slotted hex nut, 7.938 [.3125] sq x 25.40 [1.000] straight key
04 – 31.75 [1.250] dia. flat root side fit, 14 tooth, 12/24 dp 30 deg. involute spline with .375-16 unc-2b thread in end, 33.0 [1.30] minimum full spline length
06 – 31.75 [1.250] dia. flat root side fit, 14 tooth, 12/24 dp 30 deg. involute spline, 38.1 [1.50] minimum full spline length with .375-16 unc-2b thread in end
07 – 31.75 [1.250] dia. flat root side fit, 14 tooth, 12/24 dp 30 deg. involute spline, 38.1 [1.50] minimum full spline length with .375-16 unc-2b thread in end, with run out spline
08 – 40.00 [1.575] dia. straight with m12 x 1.75-6h thread, 7.955 [.3132] x 11.979 [.4716] wide x 69.98 [2.755] straight key
10 – 32.00 [1.260] dia. straight shaft with m8 x 1.25-6h thread in end, 9.982 [.3930]w x 7.995 [.3132]h x 45.00[1.772]l key
11 – 38.10 [1.500] dia. straight shaft with .375-16 unc-2b thread, and 9.52 [.375] sq x 57.2 [2.25] straight key
17 – 28.22 [1.111] dia. flat root side fit, 17 tooth, 16/32 dp 30 deg. involute spline, 28.58 [1.125] minimum full spline length
35 – 31.75 [1.250] dia. .125;1 tapered shaft per sae j501 with 1.000-20 unef-2a threaded shaft end
45 – 32.00 [1.260] dia. 10;1 tapered shaft per iso r775 with m10 x 1.50-6h thread in end, 6.00 [.236] sq. x 50.00 [1.968] key
96 – 38.10 [1.500] dia. flat root side fit, 17 tooth, 12/24 dp 30 deg. involute spline with .375-16 unc-2b thread in end, 31.2 [1.23] minimum full spline length, reduced length
97 – 38.10 [1.500] dia. flat root side fit, 17 tooth, 12/24 dp 30 deg. involute spline with .625-18 unf-2b thread in end, 31.2 [1.69] minimum full spline length
98 – 41.28 [1.625] dia. tapered with 11.112 [.4375] sq x 31.75 [1.250] straight key, 1.250-18 unef-2a thread with slotted hex nut