10 Configuration
- Sequence 1 product MOTOR M 1
- Sequence 2 series 10,000 SERIES 10 2
- Sequence 3 displacement 479.5 CM3/R [29.26 IN3/R] 3
- Sequence 4 mounting type STANDARD, 4 BOLT; 127.0 [5.00] PILOT DIA. 16.76 [.660] DIA. HOLES ON 161.92 [6.375] DIA. BOLT CIRCLE. 4
- Sequence 5 output shaft 53.98 [2.125] DIA. FLAT ROOT,MAJOR DIA. FIT,16 TOOTH, 8/16 DP, 30 DEGREE INVOLUTE SPLINE WITH .500-20 UNF-2B THREAD IN END. 52.07 [2.050] MINIMUM FULL SPLINE LENGTH 5
- Sequence 6 ports 1.3125-12 UN-2B SAE O-RING STAGGERED PORTS 6
- Sequence 7 case flow options No Preference 01 7
- Sequence 8 low pressure relief NONE 0 8
- Sequence 9 pressure / flow option NONE 00 9
- Sequence 10 geroler option STANDARD 0 10
- Sequence 11 seal option STANDARD 11
- Sequence 12 accessories NONE 12
- Sequence 13 special feature (hardware) NONE 00 13
- Sequence 14 special feature (assembly) NONE 14
- Sequence 15 paint / packaging NONE 15
- Sequence 16 customer identification NONE 00 16
- Sequence 17 design code THIRD C 17
- Blank Blank Blank