0J2 Configuration
- Sequence 1 product MOTOR M 1
- Sequence 2 series J2 SERIES 0J 2
- Sequence 3 displacement 8.2 CM3/R [.50 IN3/R] 3
- Sequence 4 mounting flange 5 BOLT, DIA 31.47 [1.239] X 5.1 [.20] PILOT .250-28 UNF MOUNTING HOLES ON DIA 45 [1.77] BOLT CIRCLE 4
- Sequence 5 output shaft DIA 15.88 [.625] STRAIGHT WITH STRAIGHT 4.72 [.186] SQ KEY WITH .250-28 THREADED HOLE 5
- Sequence 6 port type .5625-18 UNF-2B SAE O-RING PORT, END PORTED 6
- Sequence 7 case drain NONE 7
- Sequence 8 special features hardware NONE 8
- Sequence 9 special features assembly NONE 9
- Sequence 10 paint/special packaging NONE 10
- Sequence 11 nameplate number NONE SPECIFIED 0 11
- Sequence 12 design code TWO B 12
- Blank Blank Blank