06 Configuration

Sequence 1 product MOTOR M 1
Sequence 2 series 6000 SERIES 06 2
Sequence 3 displacement 491.4 CM3/R [29.99 IN3/R] 3
Sequence 4 mounting type STANDARD; (SAE CC); 4 BOLT; 127.0 [5.00] PILOT DIA. 14.35 [.565] DIA. HOLES ON 162.0 [6.38] DIA. BOLT CIRCLE 4
Sequence 5 output shaft 44.02 [1.733] DIA. FLAT ROOT SIDE FIT; 13 TOOTH; 8/16 DP 30 DEG. INVOLUTE SPLINE WITH .375-16 UNC-2B THREAD IN END 51.6 [2.03] MINIMUM FULL SPLINE LENGTH 5
Sequence 6 ports 1.3125-12 UN-2B SAE O-RING PORTS - STAGGERED PORTS 6
Sequence 7 case flow options .4375-20 UNF-2B SAE O-RING PORT WITH CHECK VALVE 7
Sequence 8 low pressure relief NONE 8
Sequence 9 pressure/flow option NONE 9
Sequence 10 geroler option STANDARD 10
Sequence 11 seal option STANDARD 11
Sequence 12 accessories NONE 12
Sequence 13 special features (hardware) NONE 13
Sequence 14 special features (assembly) NONE 14
Sequence 15 paint/packaging PRIMER LOW GLOSS BLACK 15
Sequence 16 customer identification NONE 00 16
Sequence 17 design code SIXTH F 17
Blank Blank Blank

Reset Reset Reset

View 226 Results Find 3D Model