Sequence 5
output shaft
no preference
00 – none (bearingless)
01 – 31.75 [1.250] dia. straight with .375-16unc-2b thread, 53.1 [2.09] max coupling length, 7.938 [.3125] sq x 41.27 [1.625] straight key
02 – 41.28 [1.625] dia. tapered with 11.112 [.4375] sq x 31.75 [1.250] straight key, 1.250-18unef-2a thread with slotted hex nut
03 – 31.75 [1.250] dia. flat root side fit, 14 tooth, 12/24 dp 30 deg. involute spline, 38.1 [1.50] minimum full spline length with .375-16unc-2b thread
05 – 31.75 [1.250] dia. tapered with 1.000-20unef-2a thread 7.938 [.3125] sq. x 25.4 [1.00] straight key (available with mounting type (e) only)
07 – 31.75 [1.250] dia. similar to sae flat root side fit, 14 tooth, 12/24 dp 30 deg. involute spline, 25.01 [.985] minimum full spline length
08 – 31.75 [1.250] dia. flat root side fit, 14 tooth, 12/24 dp 30 deg. involute spline 38.1 [1.50] minimum full spline length (available with mounting type (e) only)
10 – 38.10 [1.500] dia. flat root side fit, 17 tooth, 12/24 dp 30 deg. involute spline, 31.2 [1.23] minimum full spline length, with .375-16 unc-2b thread in end
11 – 40.00 [1.575] dia. straight with m12 x 1.75-6h thread, 7.955 [.3132] x 11.979 [.4716] wide x 69.98 [2.755] straight key
13 – 31.75 [1.250] dia. flat root side fit, 14 tooth, 12/24 dp 30 deg. involute spline, 42.9 [1.690] minimum full spline length with .375-16 unc-2b thread
17 – 38.10 [1.500] dia. flat root side fit, 17 tooth, 12/24 dp 30 deg. involute spline, 56.0 [2.20] minimum full spline length, with .375-16 unc-2b thread in end
23 – 38.10 [1.500] dia. straight with .375-16 unc-2b thread, and 9.52 [.375] sq x 41.28 [1.625] straight key
26 – 41.28 [1.625] dia. tapered with 11.112 [.4375] sq x 25.40 [1.000] straight key, 1.250-18unef-2a thread with slotted hex nut
29 – 31.75 [1.250] dia. tapered with 7.938 [.3125] sq x 25.40 [1.000] straight key, 1.000-20 unef-2a thread with slotted hex nut
30 – 34.92 [1.375] dia. type 1 spline (6 spline power take off) per asae s203.13, 76.2 [3.00] minimum full spline length (reduced shaft length).
32 – 31.75 [1.250] dia. flat root side fit, 14 tooth, 12/24 dp 30 deg. involute spline, 38.1 [1.50] minimum full spline length with .375-16unc-2b thread, 20.7 [.815] extended shaft length