DG5V8 Configuration
- Sequence 1 seal type (0) STADARD BUNA-NITRILE SEALS 1
- Sequence 2 valve type (DG5V) SOLENOID CONTROLLED, PILOT OPERATED DCV WITH 350 BAR RATING DG5V 2
- Sequence 3 interface (8) ISO 4401-8 INTERFACE, SIZE 8 -8 3
- Sequence 4 pilot valve (S) STANDARD PERFORMANCE PILOT VALVE (DG4V-3S) 4
- Sequence 5 reducer module No Preference _ 5
- Sequence 6 gauge port thread type (0) GAUGE PORT 0.4375?-20UNF, SAE THREAD 6
- Sequence 7 spool type (33) CLOSED CENTRE, A, B RESTRICTED TO T. P BLOCKED 7
- Sequence 8 spring arrangement (N) NO SPRING DETENTED 8
- Sequence 9 build orientation (0) STANDARD BUILD 9
- Sequence 10 manual override (0) PLAIN OVERRIDE IN SOLENOID ENDS ONLY 10
- Sequence 11 response (0) STANDARD LOW SHOCK MODELS 11
- Sequence 12 spool control (2) PILOT CHOKE (DUAL) ADJUSTMENTS 12
- Sequence 13 spool monitoring switch (0) NOT REQUIRED 13
- Sequence 14 pilot supply (0) INTERNAL PILOT PRESSURE 14
- Sequence 15 pilot drain (0) EXTERNAL PILOT DRAIN 15
- Sequence 16 check valve (0) NOT REQUIRED 16
- Sequence 17 solenoid identification (M) FLAG WITH STANDARD BUILD AS PER ANSI B93 9 17
- Sequence 18 pilot spool monitoring switch No Preference _ 18
- Sequence 19 coil type (U) ISO4400, DIN43650 CONNECTOR 19
- Sequence 20 solenoid indicator light (0) NO SOLENOID INDICATOR LIGHT 20
- Sequence 21 diode (0) NO DIODE 21
- Sequence 22 coil voltage (B) 110V AC 50HZ / 120V AC 60 HZ 22
- Sequence 23 orifice plug p (0) NOT REQUIRED 23
- Sequence 24 orifice plug a No Preference _ 24
- Sequence 25 orifice plug b (0) NOT REQUIRED 25
- Sequence 26 design code (10) DESIGN NUMBER -10 26
- Sequence 27 special features NONE 27
- Blank Blank Blank