MTB 3D Model Configuration
This tool does not apply engineering rules to model code combinations. Engineering rules will be applied at time of order. Sequences that do not affect the external appearance of the model may not be displayed.
- Sequence 1 product MOTOR M 1
- Sequence 2 series T SERIES MOTOR W/BRAKE TB 2
- Sequence 3 displacement No Preference 3
- Sequence 4 mounting type 2 BOLT STD 82.50 (3.248) DIA. X 3.05 (.120) PILOT, 13.59 [.535] DIA. MOUNTING HOLES ON 106.35 [4.187] DIA. B.C. 4
- Sequence 5 output shaft 25.4 (1.00) DIA. STRAIGHT WITH WOODRUFF KEY, .250-20 UNC-2B HOLE IN SHAFT END 5
- Sequence 6 port type MANIFOLD PORTS (.3125-18 UNC-2B MOUNTING HOLES) 6
- Sequence 7 case flow options NONE SPECIFIED 00 7
- Sequence 10 seal options STANDARD SEALS 10
- Sequence 12 valve options NONE 00 12
- Blank Blank Blank
View and Download
Make sequence selections in order of most important to least to find a single 3D model. Only visually distinguishable features are available for configuration, features not relevant to 3D modeling have been omitted.
No models are available for your selections. Select the no preference option on sequences starting with least important until a model becomes available.