ADK 3D Model Configuration
This tool does not apply engineering rules to model code combinations. Engineering rules will be applied at time of order. Sequences that do not affect the external appearance of the model may not be displayed.
- Sequence 1 product MOTOR A 1
- Sequence 2 series 4000 COMPACT SERIES DK 2
- Sequence 3 displacement 324.6 CM3/R [19.81 IN3/R] 3
- Sequence 4 mounting type STANDARD, 2 BOLT; 101.6 [4.00] PILOT DIA. 13.59 [.535] DIA. HOLES ON 146.0 [5.75] DIA. BOLT CIRCLE (SIMILAR TO SAE B) 4
- Sequence 5 output shaft 28.22 [1.111] DIA. FLAT ROOT SIDE FIT, 17 TOOTH, 16/32 DP 30 DEG. INVOLUTE SPLINE, 28.58 [1.125] MINIMUM FULL SPLINE LENGTH 5
- Sequence 6 ports .750-16 UNF-2B SAE O-RING PORTS - PORTS ORIENTED 180 DEG TO EACH OTHER 6
- Sequence 9 valve option NONE 00 9
- Sequence 10 accessories NONE 10
- Blank Blank Blank
View and Download
Make sequence selections in order of most important to least to find a single 3D model. Only visually distinguishable features are available for configuration, features not relevant to 3D modeling have been omitted.
No models are available for your selections. Select the no preference option on sequences starting with least important until a model becomes available.