10 3D Model Configuration
This tool does not apply engineering rules to model code combinations. Engineering rules will be applied at time of order. Sequences that do not affect the external appearance of the model may not be displayed.
- Sequence 1 product MOTOR M 1
- Sequence 2 series 10,000 SERIES 10 2
- Sequence 3 displacement 940.8 CM3/R [57.41 IN3/R] 3
- Sequence 4 mounting type WHEEL, 4 BOLT; 16.76 [.660] DIA. HOLES ON 209.55 [8.250] DIA. BOLT CIRCLE 4
- Sequence 5 output shaft 57.15 [2.250] DIA. .125;1 TAPERED SHAFT PER SAE J501 WITH 1.500-18 UNEF-2A THREADED SHAFT END AND SLOTTED HEX NUT, 14.288 [.5625] SQUARE X 50.8 [2.00] STRAIGHT KEY 5
- Sequence 6 ports 31.75 [1.250] DIA. 4 BOLT SPLIT FLANGE, STAGGERED PORTS WITH .4375-14 UNC-2B TAPPED MOUNTING HOLES 6
- Sequence 7 case flow options No Preference 01 7
- Sequence 9 pressure / flow option NONE 00 9
- Sequence 11 seal option STANDARD 11
- Blank Blank Blank
View and Download
Make sequence selections in order of most important to least to find a single 3D model. Only visually distinguishable features are available for configuration, features not relevant to 3D modeling have been omitted.
No models are available for your selections. Select the no preference option on sequences starting with least important until a model becomes available.