06 3D Model Configuration
This tool does not apply engineering rules to model code combinations. Engineering rules will be applied at time of order. Sequences that do not affect the external appearance of the model may not be displayed.
- Sequence 1 product MOTOR M 1
- Sequence 2 series 6000 SERIES 06 2
- Sequence 3 displacement 391.7 CM3/R [23.90 IN3/R] 3
- Sequence 4 mounting type BEARINGLESS; 4 BOLT; 127.0 [5.00] PILOT DIA. 14.35 [.565] DIA. HOLES ON 162.0 [6.38] DIA. BOLT CIRCLE 4
- Sequence 5 output shaft NONE (BEARINGLESS) 5
- Sequence 6 ports 1.3125-12 UN-2B SAE O-RING PORTS - STAGGERED PORTS 6
- Sequence 7 case flow options REVERSE FLOW SHUTTLE VALVE WITH .5625-18 UNF-2B SAE O-RING PORT, LOW DIFFERENTIAL PRESSURE SHUTTLE 7
- Sequence 8 low pressure relief SET @ 4.5 BAR [65 LBF/IN2] 8
- Sequence 9 pressure/flow option NONE 9
- Sequence 10 geroler option STANDARD 10
- Sequence 11 seal option STANDARD 11
- Sequence 12 accessories LONG BODY DIGITAL SPEED PICKUP (30 PULSE) 127 [5.0] LEAD WIRE WITH PACKARD WEATHER PAC SHROUD CONNECTOR (A=SIGNAL; B=SIGNAL; C=COMMON) 12
- Sequence 13 special features (hardware) VALVE WITHOUT SLOTS 13
- Sequence 14 special features (assembly) NONE 00 14
- Sequence 15 paint/packaging PRIMER LOW GLOSS BLACK 15
- Sequence 16 customer identification NONE 00 16
- Sequence 17 design code SIXTH F 17
- Blank Blank Blank
View and Download
Make sequence selections in order of most important to least to find a single 3D model. Only visually distinguishable features are available for configuration, features not relevant to 3D modeling have been omitted.
No models are available for your selections. Select the no preference option on sequences starting with least important until a model becomes available.